Macrofauna and polychaete species abundance data were obtained from replicate megacore samples collected from inside the Whittard Canyon (N.E. Atlantic) and the adjacent slope to the west of the canyon during cruise JC036 in June and July 2009. Four sites were sampled, three in the Whittard Canyon branches (Western, Central and Eastern) and one site on the slope to the west of the canyon. Five deployments were conducted in the Western branch, six in the Central and Eastern branches and five at the slope site. One extra deployment was made in the Central and Eastern branches to compensate for the failure to recover sufficient cores. All sites were located at 3500 m depth. Samples were collected using a Megacorer fitted with eight large (100 mm internal diameter) core tubes. Core slices from the same sediment layer from one deployment were pooled to make one replicate sample. The number of cores pooled per deployment ranged from 3 to 7 and the area of seabed sampled varied accordingly. The top three sediment horizons (i.e. 0–1, 1–3 and 3–5 cm), were analysed in toto. Macrofauna were identified to higher taxa levels, and polychaetes to species level and counts of species/taxa recorded for each site. AphiaIDs have been assigned to the samples - where identification was only possible to genus or family level, the aphiaIDs for genus and family have been supplied. The supplied aphaIDs are those that were acceptable at the time of the analysis and not their more recent superseding terms. This cruise was part of the HERMIONE project and the data formed the basis of L. Gunton's PhD thesis 'Deep-Sea Macrofaunal Biodiversity of the Whittard Canyon (NE Atlantic)'.

The dataset comprises physical, biogeochemical and biological oceanographic, surface meteorological and benthic measurements. Hydrographic profiles including temperature, salinity, fluorescence, transmissance and suspended sediment concentration were collected at numerous stations, while surface hydrographic (fluorescence, transmissance, sea surface temperature, salinity) and meteorological (irradiance, air temperature, humidity, wind speed/direction) data were collected across the survey areas. Sediment, pore water and water column samples were also collected for biogeochemical analysis, as were biological samples for the purposes of species classification and abundance analyses. The data were collected across the Indian Ocean, Arabian Sea and Pakistan margin areas between March and October 2003. Data collection was undertaken by the RRS Charles Darwin during four cruises: CD145 (12 March 2003 to 9 April 2003), CD146 (12 April 2003 to 30 May 2003), CD150 (22 August 2003 to 15 September 2003) and CD151 (17 September 2003 to 20 October 2003). Conductivity-temperature-depth (CTD) profilers with auxiliary sensors, benthic samplers and nets were deployed from the ship, while underway sensors provided continuous surface ocean, meteorological and bathymetric data. The study was designed to investigate an oxygen-minimum zone (OMZ) in the northern Arabian Sea. Chief Investigators include Gregory L Cowie (University of Edinburgh School of GeoSciences) and Brian J Bett (Southampton Oceanography Centre), while other institutions including the Dunstaffnage Marine Laboratory, University of Liverpool and Netherlands Institute of Ecology were also involved in the research. Data management is being undertaken by BODC. Some of the data are still undergoing processing at BODC and further data are expected from originators in the future.

The dataset contains hydrographic and biogeochemical data, including continuous underway measurements of surface temperature, salinity, nutrients, chlorophyll and attenuance, irradiance and bathymetric depth. Underway dissolved oxygen and/or trace metal measurements were also collected on occasion. Hydrographic profiles of temperature, salinity, transmittance, fluorescence, dissolved oxygen (data often of poor quality) and scalar irradiance were undertaken, and associated water samples were routinely analysed for suspended particulate material (SPM), chlorophyll, nutrients and particulate organic carbon/particulate organic nitrogen (POC/PON). In addition, dissolved and particulate trace metals, production, contaminants, dissolved organic carbon/total dissolved nitrogen (DOC/TDN) were determined in some cases. Benthic measurements were also collected, including benthic flux determinations (microcosm experiments), sediment characterisation, pore water chemistry measurements and the quantification of the benthic macrofauna. The coastal oceanographic data set was collected along the east coast of England between Great Yarmouth and Berwick upon Tweed. Data were collected between December 1992 and July 1995 during a series of 17 RRS Challenger cruise legs. Most cruises covered two survey grids: one from Great Yarmouth to the Humber designed around the distribution of the sandbanks and a second simple zig-zag grid from the Humber to Berwick on Tweed. A large number of anchor stations, usually over one or two tidal cycles, were worked in the vicinity of the Humber mouth or the Holderness coast. Each cruise leg returned underway data and conductivity-temperature-depth (CTD) data and water bottle rosette samples from grid nodes. A Lasentech in-situ particle sizer was used to obtain grain size distributions at spot depths for each CTD station on many of the cruise legs. Box and multicorer samples were collected on approximately one third of the cruise legs. The River-Atmosphere-Coast Study (RACS) was the component of the Land Ocean Interaction Study (LOIS) programme looking at processes from the river catchment into the coastal sea. Investigators include representatives of Plymouth University, Southampton University, Liverpool University, University of East Anglia, Newcastle University, Plymouth Marine Laboratory, and the University of Wales, Bangor. All data sets collected during the RACS Challenger cruises are held by the British Oceanographic Data Centre (BODC). All underway and CTD data have been fully calibrated and quality controlled by BODC. The water sample and benthic data sets have been quality controlled by the data originators and submitted to BODC. The data are held in the BODC project database and have been published as part of a fully documented CD-ROM product.

The Northern Seas Programme dataset comprises hydrographic, biogeochemical, biological and meteorological data. Hydrographic profiles provided measurements of parameters such as temperature, salinity, fluorescence and dissolved oxygen, while current velocities and acoustic backscatter were also measured. A comprehensive water sampling program permitted the collection of biogeochemical data including concentrations of various organic compounds, dissolved gas concentrations and radioactivity. Water samples were also analysed for phytoplankton, zooplankton and viruses. Larger biological samples were obtained from the water column using trawl nets and cetacean distributions were monitored using hydrophone arrays. Sediment samples were collected at various locations and analysed for biogeochemical parameters and zoobenthos. Sample data were supplemented by those derived from experiments, while bathymetry and meteorological parameters were measured across the study area. Data collection was undertaken in the Irish and northern North Seas, across the NE Atlantic and up to the marginal Arctic pack ice zone. This includes the territorial waters of the UK, Norway and the Russian Arctic, and extends from coastal fjords to the ocean margins. The data were collected during the period 2001-2007 over a number of cruises: RRS Discovery cruise D257, RRS James Clark Ross cruises JR75 and JR127, RRS Charles Darwin cruise CD176 and FS Poseidon cruise PO300/2. Measurements were taken using a variety of instrumentation, including conductivity-temperature-depth (CTD) profilers with attached auxiliary sensors, bathymetric echosounders, sediment samplers, trawl nets and acoustic Doppler current profilers (ADCPs), while incubation chambers were used for shipboard experiments. The programme was designed to advance the understanding of how marine systems in Northern Seas respond to environmental and anthropogenic change and was developed in three themes: Theme A - Understanding fjordic systems insights for coastal and oceanic processes; Theme B - Ocean Margins: the interface between the coastal zone and oceanic realm; Theme C - Measuring and modelling change: sea sensors and bioinformatics. Theme B included the Ellett Line Time Series. The Northern Seas Programme was co-ordinated by the Scottish Association for Marine Science (SAMS). Data from the programme are held at the British Oceanographic Data Centre.

The Marine Environment Monitoring and Assessment National database (MERMAN) is a national database which holds and provides access to data collected under the Clean Safe Seas Environmental Monitoring Programme (CSEMP) formerly the National Marine Monitoring Programme (NMMP). The data collected are the responsibility of the Competent Monitoring Authorities (CMAs) who collect the samples from stations in UK waters using water sampling techniques, trawls, nets or grabs. The CMAs then send the collected samples to accredited laboratories where they are analysed. A weighting is calculated, based on the quality of the analysis. The weighting score incorporates the laboratory accreditation, reference material, inter-laboratory comparisons, detection limits, uncertainties and standard deviations. Where data do not meet a threshold score they are given a status of ‘FAIL’ and although they are stored they are not made available to external users. The MERMAN dataset starts in 1987 with greater use of the database occurring from 1997 onwards. Data are submitted by the CMAs annually and an annual submission may include updates to legacy data to provide additional data or improve data/metadata. The data held in MERMAN fulfils the UK's mandatory monitoring requirements under the Oslo and Paris Convention (OSPAR) Joint Assessments and Monitoring Programme (JAMP). These data are used in support of European Commission (EC) directives and national assessments, such as Charting Progress 2 and are also supplied to the European Marine Observation and Data Network (EMODNET).

The data set includes hydrographic profiles (including temperature, salinity, attenuance, chlorophyll, oxygen, irradiance, turbulence, sound velocity and currents), hydrographic time series (temperature, currents, fluorescence, bottom pressure), water samples (>70 parameters measured), sediment samples (>160 parameters measured), sediment trap samples (>10 parameters measured), production experiments and marine snow camera profiles. Additional meteorological and wave records are also available, as well as satellite imagery and underwater photography (water column and seabed). The data were collected on the Hebridean Slope (NW of Ireland) between March 1995 and September 1996. Measurements were collected via a combination of shipboard instrument deployments, including >1,800 conductivity-temperature-depth (CTD) and SeaSoar (undulating oceanographic recorder) profiles, >100 expendable bathythermograph (XBT) profiles, >38,000 acoustic Doppler current profiler (ADCP) profiles, >35 core profiles, >800 turbulence profiles, >40 marine snow camera profiles, >55 radiometer profiles and >25 sound velocity and travel time experiments. Benthic lander deployments were also undertaken, along with shipboard incubation experiments and drifting buoy deployments (48 tracks). An intensive water sampling programme provided >2,500 samples for biological and biogeochemical analysis. An extensive moored instrument array was maintained throughout the experiment, including sediment traps, recording current meters (104 series), electromagnetic current meters (9 series), ADCPs (16 series), thermistor chain and temperature probes (70 series), fluorometers (18 series), transmissometers (16 series), light meter (5 series), bottom pressure recorders (11 series), plus one waverider buoy series and three meteorological buoy time series. The Shelf Edge Study (SES) was an intensive multidisciplinary experiment and formed part of the NERC Land Ocean Interaction Study. The British Oceanographic Data Centre (BODC) assembled over 95% of the data sets collected during SES into its project database system. Once basic quality control procedures had been completed the data set was published, complete with extensive data documentation, on CD-ROM.

The data set comprises a diverse collection of physical, chemical and biological measurements, encompassing over 1000 parameters. There are data from over 1650 conductivity-temperature-depth (CTD)/rosette stations, over 300 core profiles, over 370 sediment trap samples and much, much more. Most of this effort was directed at the region of the east Atlantic margin between La Chapelle Bank and the Goban Spur (between France and Ireland). In addition, there were two secondary areas of interest: the Norwegian Shelf Break just off Tromso and the Iberian Margin, either off Vigo or in the vicinity of the Tagus estuary. Measurements were collected from April 1993 until the end of December 1995 during 55 research cruise legs. Data were collected using a variety of equipment and techniques, including expendable bathythermography (XBTs), CTDs and oceanographic undulators with auxiliary sensors. These hydrographic profiles were accompanied by net hauls, plankton recorder deployments, sediment cores and comprehensive water and air sampling programmes during which a wide variety of chemical and biological parameters were measured. The station data were supplemented by underway measurements of oceanographic and meteorological properties. Results from production and trace metal experiments are also included in the dataset, as are bathymetric data from the British Oceanographic Data Centre (BODC) GEBCO digital Atlas, air-sea flux measurements and data from moored instruments and benthic landers that were deployed for periods from a few weeks to a year. The dataset also includes imagery from satellites, water column and seabed photography, scanning electron micrographs and X-ray photographs. FORTRAN source code for biogeochemical models developed during OMEX I is also included. The aim of the project was to study biogeochemical processes at the shelf break and to quantify the fluxes of material between the shelf and the open ocean. OMEX I involved scientists from 30 institutions in 10 countries. BODC is assembling the data sets collected during OMEX I into its database system and the data are also available on CD-ROM.